ZyXEL Communications MSC1000G Series, Руководство пользователя

Страница: 290 / 1168

Chapter 9 Subscriber Port Setup Screens
Management Switch Card User’s Guide
290
9.25 The H248 Port Setup Screen
Use this screen to manage and configure the VoIP settings of each port on your H.248 line card(s).
Click
Port > VoIP H248 . The following screen displays.
Figure 186
Port > VoIP H248 Screen
The following table describes the labels in this screen.
Apply Click this to save your changes to the MSC’s volatile memory. The MSC loses these
changes if it is turned off or loses power, so use the
Config Save link on the
navigation panel to save your changes to the non-volatile memory when you are
done configuring.
Cancel Click this to begin configuring the fields again.
Table 131
The Advanced Port SIP Setup Screen
LABEL DESCRIPTION
Table 132
Port > VoIP H248 Screen
LABEL DESCRIPTION
Slot
Port
Use the drop-down list boxes to select the port on an active VoIP line card you want
to configure.
Load Click this to display the port’s current settings.
Enable Select the check box to activate H.248-based VoIP on the specified port.