ZyXEL Communications MSC1000G Series, Руководство пользователя

Страница: 1002 / 1168

Chapter 33 switch Commands
Management Switch Card User’s Guide
1002
This example sets the MSC to use link aggregation on the subtending ports. This also copies the
configuration of subtending port one to subtending port two. The system asks you to confirm if this
is what you want to do.
33.6.5 switch dot3ad disable Command
Syntax:
switch dot3ad disable sub|up
where
This command turns off link aggregation on subtending or uplink ports.
This example sets the MSC to not use link aggregation on the uplink ports.
33.6.6 switch dot3ad show Command
Syntax:
switch dot3ad show
This command displays the link aggregation state of the trunk groups.
This command displays the link aggregation state of the subtending and uplink ports.
Here is an example.
“V” displays for trunking groups that have link aggregation enabled “-” displays for ports that do
not.
ras> switch dot3ad enable sub
Enabling sub trunking will copy configurations of port sub1 to port sub2
Configurations of port sub2 will be lost!
Do you wish to continue? ('y' to continue)
sub
= The subtending ports
up
= The uplink ports.
ras> switch dot3ad disable up
ras> switch dot3ad show
agg enable type port
---- ------ ------ -----------------------------------------------
tsub - static sub1 sub2
tup - static up1 up2