ZyXEL Communications MSC1000G Series, Руководство пользователя

Страница: 584 / 1168

Chapter 14 Sys Screens
Management Switch Card User’s Guide
584
Figure 401
Server Setup
The following table describes the labels in this screen.
Table 314
Server Setup
LABEL DESCRIPTION
Authentication
Server Use this section to configure your authentication settings.
Mode This field is only valid if you configure multiple servers.
Select index-priority and the system tries to authenticate with the first configured
server, if the server does not respond then the system tries to authenticate with the
second server.
Select round-robin to alternate between the servers that it sends authentication
requests to.
Timeout Specify the amount of time in seconds that the system waits for an authentication request
response from the server.
If you are using index-priority for your authentication and you are using two
servers then the timeout value is divided between the two servers. For example, if
you set the timeout value to 30 seconds, then the system waits for a response from the first
server for 15 seconds and then tries the second server.
Index This is a read-only number representing a server entry.
IP Address Enter the IP address of an external server in dotted decimal notation.
TCP Port The default port of a server for authentication is 49 . You need not change this value
unless your network administrator instructs you to do so.