ZyXEL Communications MSC1000G Series, Руководство пользователя

Страница: 984 / 1168

Chapter 33 switch Commands
Management Switch Card User’s Guide
984
show
Displays the bandwidth control settings. 1
bcastctrl show
Displays broadcast and multicast storm control
settings. 1
threshold < giga-port > < bc-
limit > < mc-limit >
< uu-limit >
Sets the limitations of broadcast, multicast and
unknown unicast packets, in packets per second
for each trunk port (0~262143, -1 means no
limit).
bc-limit
:
broadcast packet limit
mc-limit
:
multicast packet limit
uu-limit
:
unknown unicast packet limit
8
cfm disable
Disables Connectivity Fault Management (CFM). 8
enable
Enables CFM. 8
lbr disable < giga-
port >|< slot-port >
Disables loopback testing on the specified port on
a line card. 8
enable < giga-
port >|< slot-port >
Enables loopback testing on the specified port on
a line card. 8
show
Displays loopback testing settings. 1
ma delete < md-name >
< ma-name >
Deletes a maintenance association (MA). 8
meplist delete
< md-name > < ma-
name > < ep-id >
Deletes a list of MA end points (MEP). 8
meplist set < md-
name > < ma-name >
<m ep-id >
Sets a list of MEP. 8
set < md-name > < ma-
name > < primary-
vlan > [< cci-
interval >]
Set an MA.
primary-vlan
: primary served VLAN of this
association.
cci-interval
: continuity check message
initiation interval, range is 4~7.
4: 1 s
5: 10 s
6: 1 min
7: 10 min
8
vlan delete < md-
name > < ma-name >
< vlan-id >
Deletes a VLAN from an MA. 8
vlan set < md-name >
< ma-name > < vlan-
id >
Associates a VLAN with an MA. 8
md delete < md-name >
Deletes an MD. 8
set < md-name >
< level >
Sets an MD and it’s level.
level
: maintenance domain level, 0~7
8
Table 386
switch Commands (continued)
COMMAND DESCRIPTION P