ZyXEL Communications MSC1000G Series, Руководство пользователя

Страница: 685 / 1168

Chapter 20 alarm Commands
Management Switch Card User’s Guide
685
20.3 alarm Commands
Use these commands to view and clear alarms. You can also set the device to report alarms to an
SNMP or syslog server that you specify.
20.3.1 alarm clear Command
Syntax:
alarm clear
This command erases (clearable) historic alarm entries.
20.3.2 alarm cutoff Command
Syntax:
alarm cutoff
This command cancels an alarm. This stops the sending of the alarm signal current. This is useful in
stopping an alarm if you have the alarm output connector pins connected to a visible or audible
alarm. The alarm entry remains in the system.
20.3.3 alarm edit Command
Syntax:
alarm edit <alarm> <fac> <target>[,<target >]
where
This command creates or edits an alarm report entry.
The following example creates an alarm report entry that sends system alarms to an SNMP server
at the local 3 log facility.
20.3.4 alarm history clear Command
Syntax:
alarm history clear [< alarm >|all < condition >|all] < severity >
This command removes historic alarm entries by alarm category, alarm condition or severity.
< fac >
=
The log facility (
local1~local7
) that has the device log the syslog messages
to different files in the syslog server. See your syslog program’s documentation for
details.
< target >
=
snmp|syslog|all|none
The type of alarm messages that the device is to
send (SNMP, syslog or all).
none
disables alarm reports on this alarm category.
ras> alarm edit sys local3 snmp