ZyXEL Communications MSC1000G Series, Руководство пользователя

Страница: 482 / 1168

Chapter 12 Statistics Screens
Management Switch Card User’s Guide
482
12.18 CFM Endpoint Statistics
To view CFM Endpoint settings and statistics, click Statistics > CFM in the navigation panel.
Figure 323
CFM Statistics
The following table describes the labels in this screen.
12.19 H.248 Interface Statistics
To view the IES’s list of H.248 interfaces and each one’s status, click Statistics > H248 .
PayloadRate(Us/
Ds kbps) This field displays the actual upstream/downstream payload rates for this bonding group.
Rx/Tx(kbps) This field displays the current receiving and transmitting data rates for this bonding group.
Table 239
IP Statistics (continued)
LABEL DESCRIPTION
Table 240
CFM Statistics
LABEL DESCRIPTION
MD, MA, Endpoint
Id Use the drop-down boxes to select an MD, MA, and end point ID for which you want to
see a CFM statistics report.
Load Click Load to display the available CFM end points based on your selected criteria.
Index This field displays the index number of a CFM end point. Click an index ID to view
detailed information on the end point.
MD This field displays the MD name to which an end point belongs.
MA This field displays the MA name to which an end point belongs.
EPID This field displays an end point ID.
REPID This field displays a list of associated remote end point IDs which have had a CFM test.
State This field displays the CFM end point connection status. Active means no connectivity
fault has been found. Error means a connectivity fault has been found on this port (end
point).
Previous, Next Click Previous or Next to respectively go to the previous or the next page if there is
more than one page of information on CFM end points.