ZyXEL Communications MSC1000G Series, Руководство пользователя

Страница: 491 / 1168

Chapter 12 Statistics Screens
Management Switch Card User’s Guide
491
The following table describes the labels in this screen.
12.24.1 IMA Group Statistics
To view basic statistics for each IMA group on the selected IMA line card, click the slot number of
the line card in the
Statistics > IMA screen.
Figure 332
IMA Statistics: IMA Line Card
The following table describes the labels in this screen.
Table 248
IMA Statistics
LABEL DESCRIPTION
ID This is the slot number of an IMA line card. Click the index number of an active line card to
display a screen that lists the current status for each port on the line card.
State This field displays the line card’s current operational status.
active means the line card is operating normally.
init means the MSC is initializing the line card.
disable means a manager has disabled the line card.
inactive means the line card is starting up or is not operating normally. This could be due to the
card starting, a firmware upgrade in progress or a malfunction. See Section 38.7 on page 1111
for what to do if the line card stays stuck in the inactive state.
Card Type This field displays the type of the line card.
Uptime This field displays how long the line card has been running since the last time it was started.
Firmware This field displays the current firmware version installed on the line card.
Table 249
IMA Statistics: IMA Line Card
LABEL DESCRIPTION
Group This is the number of an IMA group. Click the number of an IMA group to display the
detailed performance statistics about the IMA group.
Available Cell Rate(Tx/
Rx) The is the current data transmission ( Tx ) or receiving ( Rx ) rate in bps, considering
all links in the IMA group are in active.
Active Link(Tx/Rx) This field displays the number of active upstream ( Tx ) and downstream ( Rx ) links on
the IMA group.
Test Processing Status This field displays whether the test pattern procedure is enabled or disabled on this
link and whether any links failed in the test.
TimeElapsed(secs) This field displays the number of seconds that have elapsed since the last data
collection.