ZyXEL Communications MSC1000G Series, Руководство пользователя

Страница: 277 / 1168

Chapter 9 Subscriber Port Setup Screens
Management Switch Card User’s Guide
277
To open this screen, click Port > IP Bridge > IPBPVC and then the index number of an active line
card that supports PVC.
Figure 176
IPBPVC: Slot
The following table describes the labels in this screen.
9.20 IPB Route Screen
Use this screen to set up and maintain the routing table for each domain. Each routing table
contains entries that, based on the destination IP address, control where the MSC forwards
packets. The MSC automatically creates routing table entries for each downlink interface and for
each edge router in the domain that the associated VLAN is in. You can create additional entries by
specifying the edge router to which the MSC should forward traffic for a particular destination IP
address or IP subnet.
To open this screen, click Port > IP Bridge > Route .
Table 126
IPBPVC: Slot
LABEL DESCRIPTION
UP Click UP to go back to the previous screen.
Delete, Select Select an entry’s Select check box and click Delete to remove the entry.
Index This field displays the index number of a IPB PVC on this slot. Click the index number to go
to a screen where you can configure the IPB PVC’s VLAN settings (see
Section 9.19.1 on
page 275 ).
Port This field displays the port number of a port on this line card that has an IPB PVC.
VPI/VCI This field displays the Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI). The VPI
and VCI identify a IPB PVC (a channel).
Profile This shows which ATM profile this channel uses.
Type This field displays IPB to indicate that this is an IPB PVC.
IPBPVC llc and vc are for a PVC running on Ethernet (IPoE), llc_r and vc_r are for a PVC running on
ATM (IPoA).
PVID This is the VLAN ID assigned to frames received on this channel.
Priority This is the priority value (0 to 7) added to incoming frames without a (IEEE 802.1p) priority
tag.
Select Select the radio button in the Select column for an entry and click Delete to remove the
entry.