ZyXEL Communications MSC1000G Series, Руководство пользователя

Страница: 671 / 1168

Chapter 19 acl Commands
Management Switch Card User’s Guide
671
19.11 acl macfilter Commands
Use the MAC filter commands to allow only incoming frames from MAC (Media Access Control)
address(es) that you specify. MAC filter commands are listed next. You may specify up to ten MAC
addresses per port.
Note: You cannot enable both MAC filtering and MAC count on the same port at the same
time.
19.11.1 acl macfilter delete Command
Syntax:
acl macfilter delete <slot-port> | <slot-port-vpi/vci> < mac >
where
This command removes a configured source MAC address from a line card’s specified DSL port or
PVC.
The following example removes the source MAC address of a0:c5:12:34:56:78 from the MAC filter
for ADSL port 5.
19.11.2 acl macfilter disable Command
Syntax:
acl macfilter disable <slot-port> | <slot-port-vpi/vci>
This command turns off the MAC filtering feature on a line card’s specified DSL port or PVC.
The following example turns off the MAC filtering feature on DSL port 4 of the line card in slot 5.
19.11.3 acl macfilter enable Command
Syntax:
acl macfilter enable <slot-port> | <slot-port-vpi/vci>
This command turns on the MAC filtering feature on a line card’s specified DSL port or PVC.
The following example turns on the MAC filtering feature on DSL port 4 of the line card in slot 5.
< mac >
=
The source MAC address in "a0:c5:12:34:56:78" format.
ras> acl macfilter delete 5-4 a0:c5:12:34:56:78
ras> acl macfilter disable 5-4
ras> acl macfilter enable 5-4