ZyXEL Communications MSC1000G Series, Руководство пользователя

Страница: 903 / 1168

Chapter 30 profile Commands
Management Switch Card User’s Guide
903
30.20.1 profile voip h248 delete Command
Syntax:
profile voip h248 delete < profile >
This command removes the specified H248 profile. An example is shown to delete the h248 profile
named “h248_profile”.
30.20.2 profile voip h248 map Command
Syntax:
profile voip h248 map [ profile ]
This command displays the specified h248 profile. An example is shown to display the h248 profile
named “h248_profile”.
30.20.3 profile voip h248 set Command
Syntax:
< profile > < mgc-ip >|< mgc-dn > [ mgcport < mgc-port >][mgc2 off|{on < mgc2-ip >|< mgc2-dn >}]
[mgc2port < mgc2-port >] [transport udp|tcp] [encode long|short] [pbit < pbit >] [dscp
< dscp >] < profile > [it < it >] [prefix < prefix > < start-num > < suffix-len >] [softswitch
<softswitch>] [vbd off|on] [rtpport < start-rtp-port > < end-rtp-port >][dmtimeout
< start-timeout > < short-timeout > < long-timeout >] [retrantime < init-retrantime > < min-
retrantime > < max-retrantime > < retran-window >] [rfc2833 off|{on < payload-type >}] [t38
off|on] [forcever off|on]
where
ras> profile voip h248 delete h248_profile
ras> profile voip h248 h248_profile
< mgc-ip >
< mgc2-ip >
=
The primary and secondary MGC server IP address.
< mgc-dn >
< mgc2-dn >
=
The primary and secondary MGC server domain name (maximum 256
characters), for example host.netdomain.
< mgc-port >
< mgc2-port >
=
The primary and secondary MGC server port.
transport
udp|tcp
=
Select whether to use UDP or TCP as the transport protocol.
encode
long|short
=
Select whether to use the long or short h248 coding type format.
pbit
=
The 802.1p priority bit for H.248 and RTP packets (0 ~ 7).
dscp
=
The DSCP bit for H.248 and RTP packet (0 ~ 63).