ZyXEL Communications MSC1000G Series, Руководство пользователя

Страница: 713 / 1168

Chapter 24 ima Commands
Management Switch Card User’s Guide
713
mgtpvc set < slot-group-vpi/vci >
< profile > <llc|vcmux>
< pvid > < priority >
Sets a bridged management PVC. When the
IES (with an IMA line card installed) is used in
a remote site (see
IMA Application on page
44 ), you must set a management PVC used to
transmit management traffic only to a remote
IES through an IMA connection.
Note: It is highly recommended that you use the
sys reboot < seconds >
command
before using any commands that may
lock yourself out from managing the
device. Use the
sys reboot cancel
command to cancel the scheduled
reboot before time is up when you are
sure that you have the correct
configuration.
8
mgtpvc set < slot-group-vpi/vci >
< profile > <llc|vcmux>
< management-ip > < gateway-
ip > < pvid > < priority >
Sets a routed management PVC. If the remote
IMA device uses a routed encapsulated (RFC
1483) PVC for management traffic
transmission, you must configure the IES to
use a routed MGTPVC.
management-ip
: This field displays the IP
address the remote IMA device uses to
connect with the IMA line card for
management traffic transmission.
gateway-ip
: This field displays the IP address
a management computer uses to connect with
the IES and manage management traffic.
Note: It is highly recommended that you use the
sys reboot < seconds >
command
before using any commands that may
lock yourself out from managing the
device. Use the
sys reboot cancel
command to cancel the scheduled
reboot before time is up when you are
sure that you have the correct
configuration.
8
show < slot|slot-group|slot-
group-vpi/vci >
Shows the mgtpvc to VLAN ID mappings on
the specified slot or slot and IMA group. 1
delete < slot-group-vpi/vci >
Removes the specified management PVC on
the specified IMA group. 8
pvc set < slot-group-vpi/vci >
< profile > < mux > < pvid >
<
priority
> [tag|untag]
Sets a PVC used by an IMA line card for
mapping the specified single-tagged frames
(by VLAN ID and priority) with a PVC
(channel). For example, you can map the
single-tagged frames with VLAN ID 100 and
priority 7 with PVC 0/33, llc.
mux
: the encapsulation method used for this
channel,
llc
or
vcmux
tag|untag
: specify whether to keep VLAN tags
(
tag
) or remove them (
untag
) from a frame
when the IMA line card sends the frame out
through this channel. The default is
untag
.
8
Table 356
ima Commands (continued)
COMMAND DESCRIPTION P