ZyXEL Communications MSC1000G Series, Руководство пользователя

Страница: 585 / 1168

Chapter 14 Sys Screens
Management Switch Card User’s Guide
585
Shared Secret Specify a password (up to 32 alphanumeric characters) as the key to be shared between the
external server and the system. This key is not sent over the network. This key
must be the same on the external server and the MSC.
Delete Check this box if you want to remove an existing server entry from the MSC. This
entry is deleted when you click
Apply .
Authorization
Server Use this section to configure your authorization settings.
Mode This field is only valid if you configure multiple servers.
Select index-priority and the system tries to authorize using the first configured
server, if the server does not respond then the system tries to authorize using the
second server.
Select round-robin to alternate between the servers.
Timeout Specify the amount of time in seconds that the system waits for an authorization request
response from the server.
If you are using index-priority for your authorization and you are using two
servers then the timeout value is divided between the two servers. For example, if
you set the timeout value to 30 seconds, then the system waits for a response from the first
server for 15 seconds and then tries the second server.
Index This is a read-only number representing a server entry.
IP Address Enter the IP address of an external server in dotted decimal notation.
TCP Port The default port of a server for authorization is 49 . You need not change this value
unless your network administrator instructs you to do so.
Shared Secret Specify a password (up to 32 alphanumeric characters) as the key to be shared between the
external server and the system. This key is not sent over the network. This key
must be the same on the external server and the MSC.
Delete Check this box if you want to remove an existing server entry from the MSC. This
entry is deleted when you click
Apply .
Accounting
Server Use this section to configure your accounting settings.
Mode This field is only valid if you configure multiple servers.
Select index-priority and the system tries to use the first configured server for
accounting, if the server does not respond then the system tries to use the second
server.
Select round-robin to alternate between the servers.
Timeout Specify the amount of time in seconds that the system waits for an accounting request
response from the server.
Index This is a read-only number representing a accounting server entry.
IP Address Enter the IP address of an external accounting server in dotted decimal notation.
TCP Port The default port of a server for accounting is 49 . You need not change this value
unless your network administrator instructs you to do so.
Shared Secret Specify a password (up to 32 alphanumeric characters) as the key to be shared between the
external accounting server and the system. This key is not sent over the network.
This key must be the same on the external accounting server and the system.
Delete Check this box if you want to remove an existing accounting server entry from the
system. This entry is deleted when you click
Apply .
Table 314
Server Setup (continued)
LABEL DESCRIPTION