ZyXEL Communications MSC1000G Series, Руководство пользователя

Страница: 989 / 1168

Chapter 33 switch Commands
Management Switch Card User’s Guide
989
enable < giga-port >
Turns on data transmission on a port. 8
flowctrl disable < giga-
port >
Turns off flow control on a port. 8
enable < giga-port >
Turns on flow control on a port. 8
frametype < giga-port >
all|tag
Sets the port(s) to accept VLAN tagged and
untagged Ethernet frames or only tagged. 8
gvrp disable < giga-
port >
Turns on GVRP for a port(s). 8
enable < giga-port >
Turns off GVRP for a port(s). 8
mode < giga-port >
uplink|subtend
Sets a port to operate as uplink or subtending. 8
mstp disable < giga-
port > < mstid >
Deactivates MSTP on the port in the spanning tree
instance. 8
enable < giga-port >
< mstid >
Activates MSTP on the port in the spanning tree
instance. 8
pathcost < giga-
port > < mstid >
< pathcost >
Sets the path cost (0~200 000 000). Enter 0 to
have the system automatically set the path cost
based on the link speed. 8
p2plink < giga-
port >
auto|enable|disab
le
Enables point-to-point connection. 8
priority < giga-
port > < mstid >
< priority >
Specify the priority (0~255) of the Ethernet port
in the MST region. The system automatically
rounds the number to the nearest multiple of 16. 8
show < mstid >
[< end_mstid >]
Displays MSTP settings. 1
name < giga-port > < name >
Sets the name of a port.
giga-port
:
enetx
(x=1~6)
or all
if trunk is
disabled,
t1|t2|all
if trunk is enabled.
name
: length <=47 characters, space is not
allowed.
8
priority < giga-port >
< priority >
Sets a port’s default ingress user priority (0~7). 8
pvid < giga-port > < vid >
Sets the PVID (Port VLAN ID) (1~4094) assigned
to untagged frames or priority frames (0 VID)
received on this port(s). 8
show
Displays port settings. 1
speed < giga-port >
< speed >
Sets a port’s speed and duplex mode. 8
vlantrunk disable < giga-
port >
Turns off VLAN trunking on a port to have it only
accept frames with registered VIDs. 8
enable < giga-port >
Turns on VLAN trunking on a port to have it accept
frames with any VID. 8
Table 386
switch Commands (continued)
COMMAND DESCRIPTION P