ZyXEL Communications MSC1000G Series, Руководство пользователя

Страница: 766 / 1168

Chapter 29 port Commands
Management Switch Card User’s Guide
766
mode < slot-port > atm|efm
Sets the transmission convergence mode for
SHDSL port(s).
efm
: use Ethernet frames inside SHDSL framing.
atm
: use ATM cells inside SHDSL framing.
8
pbo < slot-port >
normal_epl|forced_ep
l|forced_no_epl
< value >
Sets power backoff for SHDSL port(s).
normal_epl
: Power backoff with EPL (Estimated
Power Loss).
forced_epl
: Forced power backoff with EPL.
forced_no_epl
:
Forced power backoff without
EPL.
value
:
0~31 in dB.
8
pmms < slot-port > < mode >
Sets the negotiated noise margin mode of the
SHDSL port(s).
mode
:
The negotiated noise margin mode, options
are
normal
or
forced
8
phyiop < slot-port > < value >
Adjusts a bit in the physical layer to avoid
interoperability issues. You may try to use this
command with value being set to 1 or 8 if you
encounter interoperability issues with some
specific CPEs.
value
: 0 - normal, 1 - IOP_BIT_0, 8 - IOP_BIT_3,
default is 0
8
set < slot-port >
< profile_name >
Sets SHDSL port(s) to use a profile created by the
profile shdsl set
command.
8
show < slot >|< slot-
port >
[ dsl | pvc | vlan
]
Displays port settings.
slot: Specifies the slot of a line card (not MSC’s
slot).
dsl
: Displays a port’s DSL settings.
pvc
: Displays a port’s PVC settings.
vlan
: Displays a port’s VLAN settings.
1
sip account < slot-port > < account >
Specifies the SIP user name a port on a VoIP line
card uses. 8
hotline <slot-port> off|
[
on
<hotline-no>
<timeout>
]
Turns on or off the hotline of a port on a VoIP line card.
Sets the hotline number and its timeout value if it is turned
on.
hotline-no
: <=31 alphanumeric characters, '+' is
allowed or use two quotation marks () to clear the field.
Note: '+' is only allowed at the first character.
timeout
: hotline timeout, 0~255 seconds, 0 means dial
immediately.
opmode < slot-port >
<DEFVAL|v5sip >
Use this command to specify the operation mode
of a VoIP port.
DEFVAL
: configure the port to use SIP to connect to
a server.
v5sip
: configure the port to use V5.2 to connect to
a traditional class 5 POTS switch.
8
Table 364
port Commands (continued)
COMMAND DESCRIPTION P