ZyXEL Communications MSC1000G Series, Руководство пользователя

Страница: 1036 / 1168

Chapter 34 sys Commands
Management Switch Card User’s Guide
1036
date set < yyyy > < mm > < dd >
Sets the system date. 8
show
Displays the current system date. 1
info chassis < chassis >
Sets the system chassis number (1~64). 8
contact < contact >
Sets contact person information. 8
frame < frame >
Sets the system frame number. 8
hostname < hostname >
Sets the system name. 8
location < location >
Sets the geographic location of the system. 8
show
Displays general system and system information. 1
monitor set < slot >
<volt|temp|fan|cpu
|mem|pbuf> < index >
< high-limit > < low-
limit >
Sets hardware monitor alarm thresholds.
volt
: Voltage
index
: 1~5 (the number of voltage sensors varies
by card)
temp
: temperature
index
: 1~3
fan
: for system FAN,
index
: 1~6 (the number of fans varies by
chassis)
cpu
: CPU
index
: 1
mem
: Memory
index
: 1
pbuf
: Packet buffer for transmission and receiving.
index
: 1
8
show < slot >
Displays the hardware monitor threshold settings
of a slot. 1
multilogin disable
Turns off multiple concurrent logins. 8
enable
Turns on multiple concurrent logins. 8
privilege set [all] < privilege >
< command >
Sets the privilege level required to execute all
commands or a specific command. See
Section
37.6 on page 1101 for the command strings to
permit on the server to allow various
FTP actions.
14
show < command >
Displays the privilege level required to execute all
commands or a specific command. 1
show
Displays the multiple login setting. 1
reboot
Restarts the system. 14
[show| sec |ca
ncel]
show
: Displays the reboot schedule.
sec
: Sets the number of seconds (1~2147483647)
before the system reboots. If there is no time
specified, the system reboots immediately.
cancel
: Aborts the scheduled system rebooting.
8
Table 387
sys Commands (continued)
COMMAND DESCRIPTION P