ZyXEL Communications MSC1000G Series, Руководство пользователя

Страница: 261 / 1168

Chapter 9 Subscriber Port Setup Screens
Management Switch Card User’s Guide
261
9.12.3 PVC Setup PVLAN Screen
Click Port > PVC in the navigation panel to open the PVC Setup screen. Click an active ADSL or
SHDSL card ID and a PVC’s index number and then click the PVLAN tab to open the following
screen. This feature also applies to VDSL2 line cards since they can fall back to ADSL. Use this
screen to configure Protocol VLAN (PVLAN) settings for the PVCs. PVLAN adds a VLAN ID and IEEE
802.1p priority to a specific protocol’s untagged traffic.
Figure 165
PVC Setup: PVLAN
The following table describes the fields in this screen.
The table in the bottom half of the screen lists the VLANs that the PVC is a member of.
Modify Click Modify to display the selected VLAN membership entry’s settings in the fields above so
you can edit them.
Delete Click Delete to remove the selected VLAN membership entry.
Index This is the number of the VLAN membership entry.
VPI/VCI This field displays the Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI). The VPI
and VCI identify the channel.
VID This field displays the number of a VLAN (VLAN ID) of which this channel is a member.
Registration This field displays “fixed” to indicate that the port is a member of the specified VLAN.
Tag This field displays “V” if the line card is to tag all frames that are transmitted out on this PVC
with this VLAN group ID. It displays “-” if the line card does not tag all frames that are
transmitted out on this PVC with this VLAN group ID.
Select Select the radio button of a VLAN membership entry and then use the Modify button or the
Delete button.
Table 116
PVC Setup: VLAN (continued)
LABEL DESCRIPTION
Table 117
PVC Setup: PVLAN
LABEL DESCRIPTION
UP Click this to return to the previous screen.
VPI/VCI This field displays the Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI). The VPI
and VCI identify the channel.