ZyXEL Communications MSC1000G Series, Руководство пользователя

Страница: 563 / 1168

Chapter 14 Sys Screens
Management Switch Card User’s Guide
563
Figure 387
Access Control: SNMP
The following table describes the labels in this screen.
Table 300
Access Control: SNMP
LABEL DESCRIPTION
Get Community Enter the get community, which is the password for the incoming Get- and GetNext-
requests from the management station. You can use up to 31 English keyboard
characters; spaces are not allowed.
Set Community Enter the set community, which is the password for incoming Set- requests from the
management station. You can use up to 31 English keyboard characters; spaces are not
allowed.
Trap Community Enter the trap community, which is the password sent with each trap to the SNMP
manager. You can use up to 31 English keyboard characters; spaces are not allowed.
Version Specify the SNMP version and access mode.
Select v2c to allow SNMPv2 read/write access.
Select v3 to allow SNMPv3 read/write access with additional user authentication and data
encryption options.
Select v3v2c to allow SNMPv3 read/write and SNMPv2 read-only access.
Trap Destination Enter the IP address of a station to send your SNMP traps to.
Version Specify the format of the SNMP trap PDU (Protocol Data Unit) to be sent. The default is
v2c .