ZyXEL Communications MSC1000G Series, Руководство пользователя

Страница: 1098 / 1168

Chapter 37 Firmware and Configuration File Maintenance
Management Switch Card User’s Guide
1098
If your FTP or SFTP client does not allow you to have a destination filename different than the
source, you will need to rename them as the MSC only recognizes “config-0” and “ras”. Be sure you
keep unaltered copies of the files for later use.
The following table is a summary. Please note that the internal filename refers to the filename on
the MSC and the external filename refers to the filename not on the MSC, that is, on your computer,
local network or FTP site and so the name (but not the extension) may vary. After uploading new
firmware, use the
sys version
command to confirm that you have uploaded the correct firmware
version.
37.3 Editable Configuration File
The configuration file can be downloaded as a plain-text (English keyboard characters) file. Edits to
the configuration can be made to this file before it is uploaded again to the IES.
Note: You can change the “.dat” file to a “.txt” file and still upload it to the IES as long as
you rename it to “config-0” when you upload it to the IES.
37.3.1 Editable Configuration File Backup
Configure your system, and then use FTP or SFTP to backup the plain-text configuration file onto
your computer. Do the following to backup the configuration file:
Use an FTP or SFTP client to connect to the IES.
C:\> ftp <IES IP address>
Type your user name and press
[ENTER]
.
User (123.23.15.86:(none)): admin
Enter the management password (1234 by default).
Password: 1234
230 Logged in
Use
get
to transfer the configuration file to the computer. The configuration file on the system (that
you want to backup to the computer) is named
config-0
.
ftp> get config-0 config.dat
Quit FTP.
ftp> quit
Table 391
File Name Conventions
FILE TYPE
INTERNAL
NAME EXTERNAL
NAME
DESCRIPTION
Configuration File config-0 *.dat This is the configuration filename for the MSC.
Firmware ras *.bin This is the generic name for the ZyNOS firmware on the MSC.