ZyXEL Communications MSC1000G Series, Руководство пользователя

Страница: 276 / 1168

Chapter 9 Subscriber Port Setup Screens
Management Switch Card User’s Guide
276
Figure 175
IPBPVC: VLAN Setup
The following table describes the labels in this screen.
9.19.2 IPBPVC by Slot Screen
This screen displays all of the IPB PVCs on a particular line card.
Table 125
IPBPVC: VLAN Setup
LABEL DESCRIPTION
UP Click UP to go back to the previous screen.
VPI/VCI This field displays the Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI). The VPI
and VCI identify a IPB PVC (a channel).
VID Type the VLAN ID to which this channel belongs. This VLAN ID must be in an IP bridge domain.
Registration Select join to have the port be a member of the specified VLAN.
Select leave to remove the port from the specified VLAN.
Tag Select the check box to tag all frames transmitted on this PVC with the port’s VID.
Apply Click Apply to save changes on the selected IPB PVC.
Clicking Apply saves your changes to the MSC’s volatile memory. The MSC loses these
changes if it is turned off or loses power, so use the Config Save link on the navigation panel
to save your changes to the non-volatile memory when you are done configuring.
Cancel Click Cancel to start configuring the screen again.
Index This field displays the index number of a IPB PVC on this port.
VPI/VCI This field displays the Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI). The VPI
and VCI identify a IPB PVC (a channel).
VID This is the VLAN ID to which this channel belongs.
Registration This field displays fixed to indicate that the port is a member of the specified VLAN.
Tag This field displays V if the line card is to tag all frames that are transmitted out on this PVC
with this VLAN group ID. It displays - if the line card does not tag all frames that are
transmitted out on this PVC with this VLAN group ID.
Select Select the radio button in the Select column for an entry and click Modify to be able to edit
the entry, or Delete to remove the entry.
Modify Select the radio button in the Select column for an entry and click Modify to be able to edit
the entry.
Delete Select the radio button in the Select column for an entry and click Delete to remove the
entry.