ZyXEL Communications MSC1000G Series, Руководство пользователя

Страница: 807 / 1168

Chapter 29 port Commands
Management Switch Card User’s Guide
807
Use this command to configure a IPB PVC’s VLAN settings.
The following example sets the PVC on slot 1, DSL port 10 with VPI 40, VCI 73 to be a member of
VLAN 402 and not tag the frames sent to this PVC.
29.22.7 port mdf Command
Syntax:
port < slot-port > < mdf_info >
This command sets the MDF (Main Distribution Frame) name for information storage.
29.23 port name Command
Syntax:
port name < slot-port > < name >
where
This command sets a name for the specified subscriber port(s).
The following example sets port 5 on the line card in slot 2 to use the name Bob.
< vid > =
The default VID (1 to 4094). Each PVC must have a unique VID since the system
forwards traffic back to the subscribers based on the VLAN ID.
You must assign a default VID (1 to 4094) and IEEE 802.1p default priority (0 to
7) to normal channels. Each PVC must have a unique VID (since the system
forwards traffic back to the subscribers based on the VLAN ID).
< registration > =
Use
join
to have the port be a member of the specified VLAN.
Use
leave
to remove the port from the specified VLAN.
< tag > =
Use
tag
to tag all frames transmitted on this PVC with the port’s VID.
Use
untag
to not frames transmitted on this PVC with the port’s VID.
ras> port ipbpvc vlan 1-10-40/73 402 join untag
< name >
=
A name to identify the subscriber port.
ras> port name 2-5 bob