Zeiss humphrey HFA II-i series, Руководство по обслуживанию на месте

Страница: 469 / 521

Page 4 FA2i-032
Networking Diagnostics
Access the HFA2i Networking Diagnostics by selecting System Setup -> Communication
Setup -> Networking Diagnostic . On the Diagnostic menu you will see the following buttons:
Test Connection, Ping a Host, Loop Back Test, Save Diagnostic Results, Reset
Networking, Show MAC Address, Restore from Archive, Reset Archive
. There is also a drop
down entitled Remote Host (Figure 3).
Figure 4. Test Connection Screen.
Test Connection –
The Test Connection button initiates a series of tests that will indicate
successful connection to the host, login to the host, access the host folder, read file from the
folder, write to the host directory and delete from the host folder. The success or failure of each
of these tasks can help in diagnosing problems (Figure 4). Each task will be recorded and then
displayed on the setup screen. Prior to selecting the test connection button, ensure that
parameters have been set in the
Communications Setup screen. Failure to properly setup the
shared folder or FPT site will result in failures during the test connection execution. This is one of
the most powerful diagnostic tools in the diagnostic menu.