Zeiss humphrey HFA II-i series, Руководство по обслуживанию на месте

Страница: 482 / 521

Page 8 FA2i-035
4. In the “ This connection uses the following items:” (located in the center of the
“General” tab), click (once) on Internet Protocol (TCP/IP) > Properties. The
following screen will be displayed:
Figure 12. Internet Protocol (TCP/IP) Properties Dialog Box
5. Change the IP Address on your laptop to the same IP address the HFA has except for
the last three digits. Change the last number of the three digits by one number
(by
doing this you are putting your laptop on the same network as the HFA).
Example:
HFA IP = 192.168.1.12
Your IP should = 192.168.1.11 or 192.168.1.13
•
Click in the Subnet mask area. Ensure that the Subnet mask on your laptop
matches the subnet mask of the HFA exactly.
•
Click on OK and restart your laptop.
6. When your laptop comes back up, login to your laptop:
•
Right-click on the My Computer icon
•
Select Properties
•
Select the Computer Name tab and write down the Computer Name and the
Workgroup Name .
7. Right-click on your Desktop and select New > Folder.
•
Name the folder HFA
•
Right-click on the folder you just created and select Sharing from the fly out menu.
•
Select Share this folder on the network .
•
Check the box that says Allow network users to change my files. The share
name should be HFA. After you verify to make sure you have the correct share
name, click OK .