Zeiss humphrey HFA II-i series, Руководство по обслуживанию на месте

Страница: 390 / 521

Page 6 FA2i-005J
• C3 software will not boot if the MO drive is disconnected or inoperative .
• Uninitialized MO diskettes will cause the system to hang during an attempt to perform a backup from hard
drive.
• Attempting to load the C3-MO system software on a 750i instrument that has system software revision C2 will
result in several 750 unique features being disabled. The instrument will have a 745 like model set of features.
• There are some issues using the C3 and earlier software with the HP LaserJet 4L printer.
SOFTWARE FEATURES - Rev. C3.1 (P/N 53324)
• Allows instrument to boot if the magnetic optical drive is disconnected or inoperative.
• System software will continue to function if a backup is attempted with an uninitialized magnetic optical disk.
• Will not disable certain 750I features if loaded over C2 software.
• Both Printrex and HP Laserjet printing have been improved.
• Includes an internal self-test for date checking. The self-test is set to run in the background unnoticed,
customers may see a pop up window asking them to verify the date shown.
• Floppy databases created on the HFA II can not be restored on the HFA 2i.
• Blank screen appears at startup.
• You can only re-initialize a floppy on the HFA 2i. If a floppy is unformatted it must be formatted on a PC prior
to use on the HFA2i.
• Removing a floppy disk from the floppy drive during a printout will create errors.
• You may see shifted text or extra slashes (/) on the extreme left side of a Printex printout.
• Models 720 may show either 115908 as a software option code if revision 3.1 is loaded over a C2.X revision.
The normal 11590C software option code can be restored on instruments with the 115908 soft option code
by restoring the calibration configuration diskette on the system. Note that it is not necessary to change the
code from 115908. All 720 units with the 115908 code will function normally.
SOFTWARE FEATURES - DST Rev. C3.1 (P/N 53325
)
• The C3.1 DST consists of one set of disks that works for instrument with or without a Magnetic Optical drive.
Otherwise the DST is identical to the C3 revision.
• The DST tool installer only accepts input from the touch screen. Keyboard input will be ignored during the
installation. Keyboard, touch screen and mouse inputs will function after the DST is running.
SOFTWARE FEATURES - Rev. 3.2 (P/N 54799
)
• The 3.2 application software changes the NVM printout to include a set of preferred values that will reduce
the probability that light intensity errors will occur.