Zeiss humphrey HFA II-i series, Руководство по обслуживанию на месте

Страница: 201 / 521

Humphrey Field Analyzer II -i Parts
Confidential and Proprietary
52235C1105 7 - 11
Field Service Guide
HFA II - i Repacking Instructions
Caution —
The bowl is easily damaged if abused.
DO NOT
store anything inside the
bowl. If the instrument is received with objects stored inside the bowl, your account will be
charged for ensuing repairs.
1) Disconnect the power cords and all peripherals from the HFA II - i .
2) Lock down the drive heads on floppy and Magnetic Optical drive using spare diskettes.
3) Pack the patient button, power cord, and all other accessories in the accessory box, if
appropriate.
4) Put the trial lens holder in the down position.
5) Rotate the HFA II - i turret completely clockwise. To hold the turret in place:
C
loop one end of the rubber-band turret restraint around the end of the small turret
pulley
C
pass the rubber band behind the turret and loop the other end around the left-hand
bowl lamp baffle inside the bowl.
6) Remove the perforated cutout from the right side of the base foam insert (item 3).
7) Place the base foam insert inside the cardboard bottom on the pallet (items 1 & 2).
8) Place the HFA II - i (item 4) in the base as indicated on the drawing.
9) Remove the perforated cutout from the right side of the right top foam insert (item 6).
10) Orient the top right and top left foam inserts to conform with the surface of the field analyzer
contours.
11) If you are shipping the keyboard (item 12) back with the unit, place the keyboard in the slot on
the rear top of the foam inserts.
12) Place accessory kit (item 7) on top of the left and right foam inserts.
13) Slide cardboard tube (item 8) over the left and right foam inserts until bottom edges touch the
bottom of the cardboard bottom.
14) Place cardboard top (item 10) on the cardboard tube.
15) Secure entire shipping container with repackaging straps (item 9) and buckles (item 11). See
the detail of how to use the buckles.