Zeiss humphrey HFA II-i series, Руководство по обслуживанию на месте

Страница: 395 / 521

FA2i-005J Page 11
SERVICE FEATURES - Application Software Rev. 4.0
• Licensing of Network, NetPro, GPA and SITA SWAP.
• Configuration of Instrument for Network and NetPro.
• Database Upgrade.
• Save to floppy the text files of system log, information screen, and calibration values.
• New tools for evaluating Networking parameters.
SERVICE CONCERNS - Application Software Rev. 4.0
• Data created on a HFA 2i with a revision 4.0 software will not be able to be saved to a HFA2i with
software revision lower than 4.0 or to any HFA II system.
See page 2 of the HFA II-i System Software
Upgrade document P/N 58122.
• Database upgrade may not be possible on existing hard drive partition due to the partition being nearly full.
If the existing 2.0 gigabyte partition is nearly full, a second partition may be created on the hard drive or
replacement of the hard drive with a drive that can be repartitioned to meet the system needs. A separate
service bulletin will cover this topic.
KNOWN ERRORS/ ISSUES - Application Software Rev. 4.0
• None.
SOFTWARE FEATURES - Rev. 4.1 Application Software (P/N 60138)
Changes
• Revision 4.1 software was designed to be compatible with the new EMI Box and the new Motor Driver Board.
If either the new EMI box (P/N 60673) or the new MDB are used, the 4.1 software must be loaded. Details
are presented in HFA2i-036 and HFA2i-038.
• Changes to Touch Screen Calibration – Rev 4.1 will beep when you have held your finger on the calibration
target for the required amount of time.
• Startup Test to Determine Calibration of Aperture – At startup of the instrument, an evaluation of correct
aperture positioning takes place. Failure of the test will result in a Startup State Error 19 error that says
Aperture may be misaligned. Pressing Proceed will not allow testing. Recalibration of the aperture and
measurement of the spot ratio with a value within specification, will be required before testing can proceed.
• Startup Test to Determine Shutter Misalignment – At startup of the instrument, an evaluation of correct shutter
positioning takes place. Failure of the test will result in a Startup State Error 18 error that says Shutter may
be misaligned. Pressing Proceed will not allow testing. Recalibration will be required before testing can
proceed.
New Features
• There are no new features or enhancements in the HFA2i Rev 4.1 software.
Fixes
• The failure to save to a floppy disk at the end of the test when the system gives the “floppy full, please insert
a new formatted floppy” message, has been corrected. With the rev 4.1 software the tests will be saved when
the new formatted floppy is inserted after the prompt.
• Long patient names are now displayed in accordance with the industry standards.
• The setting of the default single field printout style for instruments with GPA will default to GPA rather than
classic printout once the GPA feature is licensed.