Zeiss humphrey HFA II-i series, Руководство по обслуживанию на месте

Страница: 287 / 521

Humphrey Field Analyzer II - i Appendix G
Confidential and Proprietary
52235C1105 G - 5
Field Service Guide
3) Select
Set Model 740 i Defaults
, a test log menu appears and displays the
model 740 i default settings.
4) Select Continue . The Model 740 i hardware Options are set and the Model/Hardware
Options Menu is displayed.
5) Switch OFF the instrument and remove the Service Key.
6) Switch ON the instrument. Select the “i” screen and verify that the correct model
number appears on the boot-up screen.
7) Proceed to “Setting the Software Options.”
For Model 750 i
1) Set up the DST for use as described in Appendix A.2, under Diagnostic Support Tool.
2) From the DST Main Menu select
Set Model/Hardware Options
. The
Model/Hardware Options Menu appears.
3) Select Set Model 750 i Defaults , a test log menu appears and displays the
model 750 i default settings.
4) Select
Continue
. The Model 750 i hardware Options are set and the Model/Hardware
Options Menu is displayed.
5) Switch OFF the instrument and remove the Service Key.
6) Switch ON the instrument. Select the “i” screen and verify that the correct model
number appears on the boot-up screen.
7) Proceed to “Setting the Software Options.”