Zeiss humphrey HFA II-i series, Руководство по обслуживанию на месте

Страница: 366 / 521

CARL ZEISS MEDITEC SERVICE DISCLAIMER
OWNER:
LOCATION:
INSTRUMENT MODEL:
DATE:
SOFTWARE REV.:
INSTRUMENT SERIAL NO.:
At your request, Carl Zeiss Meditec has agreed to service the instrument described above. The possibility exists that
during the course of servicing, customer data that has previously been entered onto a hard disk (or onto another media
whether internal of external) may be erased or otherwise adversely affected. Carl Zeiss Meditec cannot guarantee that
the customer data will not be lost or altered and has no obligation or responsibility to reconstruct the customer data
which may have to be restored back onto a hard disk (or onto another media whether internal or external) for any
reason.
If a hard disk (or another media whether internal or external) that was purchased through Carl Zeiss Meditec, Inc. or
came with your instrument has to be replaced or erased / reformatted, it will be restored to its original factory
configuration. Customer data will need to be restored back onto the hard disk (or onto another media whether internal
or external) by the customer.
WARNING:
1. For Hard Disks - It is the customer’s responsibility to archive / backup their database
files before service is performed on their equipment.
2. For Networked Instruments / Modalities – As a result of the requested service, Customer
acknowledges that there is potential risk of damage to computer hardware, network
devices, peripherals, accessories, data storage servers, data storage media, or other
hardware not cited. Customer also acknowledges potential risk of damage to, and
corruption or loss of computer software, applications, and data.
3. For other media whether internal or external - It is the customer’s responsibility to
maintain a copy of their programmed settings in case the programmed settings become
corrupted and irretrievable.
Note – Carl Zeiss Meditec, Inc. is obligated to strictly follow the regulations under the Health Insurance
Portability and Accountability Act (HIPAA).
Please sign below to indicate that you have read this disclaimer, agree to be bound by it, and have authorized the Carl
Zeiss Meditec Field Support Engineer to provide the requested service.
ACCEPTED AND AGREED TO:
Signature
Name (printed)
Date
Title (Officer or authorized representative)
CARL ZEISS MEDITEC
FIELD SUPPORT ENGINEER:
Signature
Name (printed)
Date
Service Call Number