Zeiss humphrey HFA II-i series, Руководство по обслуживанию на месте

Страница: 195 / 521

Humphrey Field Analyzer II -i Parts
Confidential and Proprietary
52235C1105 7 - 5
Field Service Guide
NOTE ­ International Operations:
Additional procedures are necessary for return of
defective parts from international service operations. Instructions have been provided to each
area of operation by the Carl Zeiss Meditec International Parts Department. If you are
unfamiliar with the required procedure for your area, or have any questions regarding the
procedure, please contact the Carl Zeiss Meditec International Parts Department.
When you receive spare parts from the Parts Department, save the packaging material for
returning the defective part for repair. Many of the parts are delicate and expensive; extra
attention to packaging will pay off in less damage to parts during shipment.
7.5 Recommended Spares
Parts that are recommended as spares for the HFA II - i (small hardware not included) are
marked with an asterisk (*) in the following parts lists. Quantities are not specified.
Appropriate spares quantities are based on instrument population in your area, commonality
of spare parts between instrument models, and experienced failure rate of parts.
The parts marked with an asterisk (*) are kept in stock and generally always available for
immediate shipment as replacements. Any parts not in this list is subject to delays in delivery.
A quantity of 1 for each of these commonly-used parts may be used as a starting point for
determining recommended spare quantities. Items and quantities may be added or deleted
based on local experience and instrument population in your area.
Sparing of small hardware (screws, washers, etc.) is necessary, but is left to the discretion of the
individual service engineer.