Zeiss humphrey HFA II-i series, Руководство по обслуживанию на месте

Страница: 266 / 521

Appendix C Humphrey Field Analyzer II - i
Confidential and Proprietary
Field Service Guide
C - 6 52235C1105
• If you search files by patient name:
Enter the name - or just the first few characters - of the patient’s last name whose test(s)
you wish to transfer. Select the test(s) you wish to transfer. All files selected will be
marked with a “
9
” to indicate that they have been selected.
• If you chose Date:
The file directory will be displayed in reverse chronological order. Enter a specific date
(mm-dd-yyyy), then choose
Enter.
The file
directory will display tests taken on the
date you selected. Select the test(s) you wish to transfer. All files selected will be marked
with a “
9
” to indicate that they have been selected.
14) Press
Proceed
. A pop up dialog box will appear advising you of the number of tests
selected to be transferred. STOP HERE! Do Not choose
Yes
to start the transfer
process.
On the HFA II - i :
15) From the Main Menu, select
System Setup
.
16) Select the
Save/Transmit
option.
17) Select
Serial Receive option.
18) On the
RS Receive Setup
options screen, select the following settings:
A) Set Baud Rate to 9600
B) Parity to Even
C) Data Bits to 7
D) Stop Bits to 1
19) Press
Proceed
. The Transmit/Save screen will then appear. Press
Proceed
.
20) The
System Setup
menu will appear.
21) From the
System Setup
, select
File Functions
.
22) Select
Transfer Tests
.
23) Select
HFA Serial Cable
as the Source.
24) Choose
Hard
or
Floppy
as the Destination, then
Proceed
.
On the HFA II
25) To proceed, select
YES
.
26) After all tests are transmitted, a pop up dialog box will appear advising you of the
number of tests that were successfully transferred.