Zeiss humphrey HFA II-i series, Руководство по обслуживанию на месте

Страница: 328 / 521

Appendix M Humphrey Field Analyzer II - i
Confidential and Proprietary
Field Service Guide
M - 2 52235C1105
7) A
Verifying Copy Disk
and then
Copying Files
prompt will again be seen
on the screen.
8) When the disk files are loaded you will see a Please Insert Disk # 3 and press
any key
message displayed.
9) Remove disk # 2 and insert disk # 3. Press any key on the keyboard.
10) A
Verifying Copy Disk
and then
Copying Files
prompt will again be seen on
the screen.
11) When the disk files are loaded you will see a Please Insert Disk # 4 and press
any key message displayed .
12) Remove disk # 3 and insert disk # 4. Press any key on the keyboard.
13) A Verifying Copy Disk and then Copying Files prompt will again be seen on
the screen.
14) When the fourth disk files have been loaded you will see
Completed copying
files, remove floppy and cycle power to complete installation on the
display.
15) Remove disk # 4 and turn the unit power to OFF.
16) Wait fifteen seconds and turn the unit power to ON.
17) Soon a
Completing the installation of HFA II - i 51220.rev C1.1 52037.A1
Existing installed product HFA II- i XXXXX.revNN XXXXX.NN Install
date MM-DD-YYYY
display will be seen. This indicates the application code
revision and the motor driver board code revision respectively of the newly
installed software as well as the application code revision and the motor driver
board code revision of the previously loaded software. The XXXXX is the part
number of the software, NN is the revision number, and MM-DD-YYYY is month,
day and year that the previous software was loaded.
18) A progress meter will be displayed and will climb to the 100 % . You will hear
three beeps during the load process indicating that the software is loading correctly.
19) When the load is completed an
Installation successful, cycle power to begin
using the installed software dialogue will replace the progress meter.
20) Turn the instrument power to OFF. Wait fifteen seconds and then turn the
instrument power to ON.