Zeiss humphrey HFA II-i series, Руководство по обслуживанию на месте

Страница: 32 / 521

General Information Humphrey Field Analyzer II - i
Confidential and Proprietary
Field Service Guide
1 - 20 52235C1105
Operational Changes -
Startup screen information, such as the model number, hard option code, soft option code,
motor board code and CPU board code, will not be displayed during the bootup process.
This information will be displayed on the “i” screen. The model, serial number, operating
system revision, language revision, and hardware option code are found on the “i” screen.
See the sample ”i” screen printout in Appendix J.
The File Functions screen has some minor changes. The Initialize Disk button has two options.
The first option is to format the floppy diskette and the second option is to format the magnetic
optical diskette. The Backup Restore Function no longer has a tape option for source or
destination, but has a magnetic optical option.
The Calibration Screen has two new buttons. The first button is the Save button. The Save
button will save the calibration data that is currently stored on the hard drive to the floppy
diskette. The calibration data that was saved prior to the last save will be erased. The second
button, the Restore button, will copy the calibration data from the floppy diskette to the hard
drive and replaces the previous data on the hard drive.
Software Loading Changes -
While the HFA II used three floppies to load the operating
system and application software, the HFA II - i requires four diskettes. The DST tool required
one disk with the HFA II, but requires three diskettes for the HFA II - i .
In all other aspects, field operation of the HFA II - i is essentially identical to the HFA II.
1.8 Peripherals
C
Mouse
C
Keyboard
C
Monitor
C
Wireless Printer Device
C
Uninterruptible Power Supply (UPS)
C
HP LaserJet Printer
Peripheral devices may be used with, and purchased for use with, the HFA II - i . The
information presented in this section is for guidance only. In no way does the information
presented here imply that any peripheral device purchased will operate in conjunction with the
HFA II - i . The only exception to this statement is if the peripheral device was purchased
directly from Carl Zeiss Meditec.
Every effort has been taken to ensure that the HFA II - i software and hardware are compatible
with the majority of off-the-shelf purchased peripherals described below. However, please be
aware that some may not be. It is the customer's responsibility as a consumer to ensure that
they follow our purchase guidelines and that they resolve any non-operational issues with the
vendor from which they purchased the peripheral device.