Model 4200-SCS
Startup Guide
PA-716 Rev. C / 11-03
1
Start Here! It’s easy...
Step 1
Unpack your Keithley 4200-SCS
Step 2
System connections – Power cord, keyboard, and printer (optional)
Step 3
Connect DUT test fixture to 4200-SCS
Step 4
Power-up & log-in
Step 5
Start KITE, open the “default” project, and select the “vds-id” test
Step 6
Test definition
Step 7
Run “vds-id” test
Step 8
View data sheet
Step 9
View graph
Step 10
Printing and exporting data
This Startup Guide selects the “default” project and runs the “vds-id” test. If you wish to select a different
project and/or test, you must modify the procedures accordingly.
Figure 1
shows how the KITE window
will look after the “default” project and “vds-id” test is selected.
Figure 1: KITE interface (“default” project shown with “vds-id” test selected)
Project Navigator
Selected Test
Toolbar
KITE Workspace
Message Area
