2
Model 4200-SCS
Step 1
Unpack your Keithley 4200-SCS
What’s in the box:
• 4200-SCS System – SMUs are built-in, and PreAmps are installed on the rear panel of the mainframe. A
PreAmp adds five lower current source-measure ranges to an SMU (10nA, 1nA, 100pA, 10pA, and 1pA).
The PreAmps can be removed from the rear panel and mounted remotely on a tester.
• Cables – 2 for each SMU.
• Y-Cable – Use to connect keyboard (with pointing device) to mainframe.
• Power cord
• 4200-SCS KTE Interactive CD-ROM
• 4200-SCS Complete Reference CD-ROM
How to lift:
• Lift the 4200-SCS from the bottom.
• Do not lift from the front bezel.
• Set on a bench or install in a rack with the optional slide rack mounting kit.
Step 2
System connections – Power cord, keyboard, and printer (optional)
Basic system connections to the 4200-SCS (shown in
Figure 2
) include the keyboard (which has a built-in
pointing device), the supplied power cord, and an optional printer. If using a USB printer, connect it to the
USB port.
WARNING
Plug the female end of the supplied power cord into the
4200-SCS, but DO NOT connect the male end to line power at
this time. Steps 2 and 3 of this Startup Guide must be performed
with the line power disconnected.
Figure 2: System connections
Keithley
4200-SCS
Mouse/Keyboard
Connector
Parallel
Connector
Keyboard
Shielded
Parallel
Cable
Parallel
Printer
* v1.1 USB connector (Windows
XP Professional operating
system) – If using a USB printer,
connect it to the USB port.
USB
Port*
INSTRUMENT
CONNECTIONS
SMU ONLY
SMU AND GNDU
GNDU
COM 1
INSTRUMENTS
SLOT
8
SLOT
7
SLOT
6
SLOT
5
SLOT
4
SLOT
3
SLOT
2
SLOT
1
LPT 1
INSTALLATION
CATEGORY
I
S
E
N
S
E
F
O
R
C
E
C
O
M
M
O
N
SENSE LO
GUARD
SENSE LO
COMMON
COMMON
FORCE
SENSE
GUARD
4200
SMU
SENSE LO
SENSE
FORCE
PA CNTRL
KEITHLEY
4200
SMU
SENSE LO
SENSE
FORCE
PA CNTRL
KEITHLEY
4210
SMU
SENSE LO
SENSE
FORCE
PA CNTRL
KEITHLEY
4210
SMU
SENSE LO
SENSE
FORCE
PA CNTRL
KEITHLEY
4200
TM
INTLK
IN
OUT
KEITHLEY
Y-Cable (supplied)
Power Cord
(supplied)
