YASKAWA HV600, Руководство пользователя

Страница: 174 / 610

2.2 A: Initialization Parameters
174 YASKAWA TOEPYAIHV6002A HV600 Drive Programming
User Parameter No. Parameter No. Saved Name
A2-21 Y1-09 Low Feedback Lvl Fault Dly Time
A2-22 Y2-01 Sleep Level Type
A2-23 Y2-02 Sleep Level
A2-24 Y2-03 Sleep Delay Time
A2-25 Y2-04 Sleep Activation Level
8 : Pump Network Multiplex
The drive automatically sets the parameters in Table 2.18 for a pump network multiplex application.
Table 2.18 Optimal Settings for Pump Network Multiplex Applications
No. Name Optimal Value
A1-02 Control Method Selection 0: V/f Control
b1-01 Frequency Reference Selection 1 0: Keypad
b1-02 Run Command Selection 1 0: Keypad
b5-01 PID Mode Setting 1: Standard
b5-39 PID User Unit Display Digits 1: One Decimal Places (XXXX.X)
b5-46 PID Unit Display Selection 1: PSI (pounds per square inch)
C1-01 Acceleration Time 1 20.0 s
C1-02 Deceleration Time 1 20.0 s
H2-02 Term M3-M4 Function Selection 42: Pressure Reached
H2-03 Term M5-M6 Function Selection 37: During Frequency Output
H3-09 Terminal A2 Signal Level Select 2: 4 to 20 mA
H3-10 Terminal A2 Function Selection B: PID Feedback
L5-01 Number of Auto-Restart Attempts 5
L5-49 Fault Retry Speed Search Select 0: Disabled
S5-05 HAND Frequency Reference 40.00 Hz
S5-10 AUTO Key Memory at Power Down 1: Enabled w/ Memory
Y1-01 Multiplex Mode 3: Memobus Network
Y1-04 Sleep Wake-up Level -10.0
Y1-06 Minimum Speed 40.0
Y1-11 High Feedback Level 100.0
Y2-01 Sleep Level Type 0: Output Frequency
Y2-23 Anti-No-Flow Bandwidth 0.40%
Y4-12 Thrust Frequency 30.0 Hz
Y4-17 Utility Start Delay 0.2 min
Y9-06 Lag Fixed Speed 54.0 Hz
YA-01 Setpoint 1 80.0%
The drive saves the parameters in Table 2.19 as user parameters.
Table 2.19 Parameters Saved as User Parameters with the Pump Network Multiplex Preset
User Parameter No. Parameter No. Saved Name
A2-01 b1-03 Stopping Method Selection
A2-02 b1-04 Reverse Operation Selection
A2-03 b2-09 Pre-heat Current 2
A2-04 b5-01 PID Mode Setting