Yamaha F4, Руководство по обслуживанию

Страница: 74 / 307

POWER UNIT
INSP
ADJ E
3-7
1
2
5
4
3
7
6
6
7
a
b
4. Inspect:
9 Valve clearance
Use feeler gauge.
Out of specification
®
Adjust.
5. Loosen:
9 lock nut (rocker arm)
NOTE:
When loosening the locknut
6
, lock the ad-
juster
7
, otherwise the locknut
6
will not
loose.
Valve clearance
Intake
a a
: 0.10 ± 0.02 mm
(0.004 ± 0.0008 in)
Exhaust
b b
: 0.10 ± 0.02 mm
(0.004 ± 0.0008 in)
3. Position:
9 Flywheel rotor
NOTE:
Turn the flywheel rotor ass’y clockwise and
check that the valves are fully closed with
there rocker arm in free position, and set
the magnet
3
on the flywheel rotor with
both core ends
4
of the ignitor ass’y
5
mated as shown.
Valve clearance
NOTE:
Adjust valve clearance, at room tempera-
ture, when piston is near T.D.C. in com-
pression process.
1. Remove:
9 Top cowling
9 Bolt (carrying handle)
9 Carrying handle 2 (protector)
9 Bottom cowling 2
9 Bolt (recoil starter)
9 Recoil starter ass’y
9 Spark plug
2. Remove:
9 Bolt (cylinder head cover)
1
9 Cylinder head cover
2
9 Gasket (cylinder head cover)