Sharp MX-M266N, Руководство по эксплуатации

Страница: 502 / 794

5-56
SCANNER/INTERNET FAX
Contents
Specifyin g the ori g inal scan size (by paper size)
If the original is a non-standard size or you wish to change the scan size, touch the [Original] key to specify the original
size manually. Place the original in the document feeder tray or on the document glass and follow the steps below.
1
Select the mode and display the ima g e settin g s screen.
(1) Touch the tab of the mode that you wish to use.
(2) Touch the [Ori g inal] key.
The automatically detected original size appears to the right of the [Original] key.
+
IMAGE SETTINGS (page 5-53)
2
Touch the [Scan Size] key.
3
Specify the scan size.
(1) Touch the appropriate ori g inal size key.
(2) Touch the [OK] key.
• If you are sending a long original, touch the [Long Size] key. Use the automatic document feeder to scan a long
original. The maximum width that can be scanned is 39-3/8" (1000 mm) (the maximum height is 11-5/8" (297 mm)).
+
TRANSMITTABLE ORIGINAL SIZES (page 5-17)
• To specify an AB size for the scan size, touch the [AB Inch] key to highlight the [AB] side and then specify the scan size.
4
Touch the [OK] key.
When [Long Size] is selected, the 2-sided scanning setting and send size cannot be changed. In addition, when only scan
destinations are selected for scan transmission or metadata transmission, scanning will take place in Mono2.
Scan/Original
OK
Auto
Auto 8½x11
Scan Size
2-Sided
Tablet 2-Sided
Booklet
Send Size 100%
Image Orientation
Scan/Original
OK
Auto
5½x8½
5½x8½R
8½x11
8½x11R
8½x13(216x330)
11x17
8½x14
Size Input
Long Size
Inch
AB
Manual Manual
(2) (1)
Scan/Original
OK
Auto
5 ½ x8 ½
Scan Si z e
2 - Sided
Tablet
2 - Sided
Booklet
Send Si z e 100 %
Image Orientation