Sharp MX-C310, Руководство по эксплуатации, Страница: 568 / 706

6-21
SYSTEM SETTINGS
Contents
OPERATION PANEL (ADMINISTRATOR)
Copy Function Settings
Item Factory default setting Page
■
Copy Function Settings
6-28
●
Initial Status Settings
6-28
X
Colour Mode Full Colour
X
Paper Tray Tray 1
X
Exposure Type Auto
X
Copy Ratio 100%
X
2-Sided Copy 1-Side to 1-Side
X
Output Auto
●
Other Settings 6-29
X
Copy Exposure Adjustment
6-29
‹
Colour 5
‹
Black & White 5
X
Add or Change Extra Preset Ratios – 6-29
X
Setting a Maximum Number of Copies 999 6-29
X
Initial Margin Shift Setting
6-29
‹
Side 1 10 mm (1/2")
‹
Side 2 10 mm (1/2")
X
Erase Width Adjustment
6-29
‹
Edge Clearance Width 10 mm (1/2")
X
Card Shot Settings
6-29
‹
Original Size X: 86 mm (3-3/8"), Y: 54 mm (2-1/8")
‹
Fit to Page Disabled
X
Disabling Deletion of Job Programs Disabled 6-29
X
Disabling of Bypass-Tray in Duplex Copy Disabled 6-29
X
Disabling of Auto Paper Selection Disabled 6-29
X
Auto Selection of Paper Tray that was Last Loaded Disabled 6-29
X
Colour 600dpi x 600dpi Scanning Mode for Document Feeder Enabled 6-30
X
Colour Quick Scan from Document Glass Disabled 6-30
X
B/W 600dpi x 600dpi Scanning Mode for Document Feeder Enabled 6-30
X
B/W Quick Scan from Document Glass Disabled 6-30
●
Colour Adjustments 6-31
X
Initial Colour Balance Setting Factory default state 6-31
X
Auto Colour Calibration – 6-31