Rohde & Schwarz CMU-K20, Руководство по эксплуатации

Страница: 7 / 646

CMU-K20/-K21/-K22/-K23/-K24 List of Tables
1115.6088.12 5 E-12
List of Tables
Table 3-1 Measurement groups in Signalling and Non Signalling mode............................................3.4
Table 4-1 GSM tolerances for spectrum due to modulation ............................................................. 4.62
Table 4-2 GSM tolerances for spectrum due to modulation (absolute) ............................................ 4.63
Table 4-3 GSM tolerances for spectrum due to switching plus modulation effects: ......................... 4.65
Table 4-4 GSM channels in uplink direction ..................................................................................... 4.70
Table 4-5 GSM channels in downlink direction................................................................................. 4.77
Table 4-6 I/Q-IF scenarios and path settings.................................................................................... 4.88
Table 4-7 GSM Power classes........................................................................................................ 4.112
Table 4-8 GSM Power control levels (PCL) .................................................................................... 4.112
Table 4-9 BLER and DBLER measurement settings ...................................................................... 4.121
Table 4-10 Frame structure for Main Service: Circuit Switched ....................................................... 4.123
Table 4-11 Frame structure for Main Service: Packet Data, Service Selection:
Red. Sig.– EGPRS sym. ................................................................................................. 4.124
Table 4-12 Frame structure for Main Service: Packet Data, Service Selection:
Red. Sig.– EGPRS asym. ............................................................................................... 4.124
Table 4-13 Frame structure for Main Service: Packet Data, any other Service Selection ............... 4.124
Table 4-8 Definition of RX Level ..................................................................................................... 4.136
Table 4-9 Definition of RX Quality................................................................................................... 4.136
Table 4-10 MS multislot classes ....................................................................................................... 4.149
Table 4-11 AMR Rate Set according to the conformance test specification .................................... 4.203
Table 5-1 Measurement objects in Signalling and Non Signalling mode ............................................5.3
Table 5-2 Repetition mode in remote control.......................................................................................5.5
Table 5-3 Limits and limit check...........................................................................................................5.6
Table 5-4 Meaning of the bits used in the
STATus:OPERation:CMU:SUM1|2:CMU<nr>
sub-registers assigned to GSMxxx-MS Non Signalling .......................................................5.7
Table 5-5 Meaning of the bits used in the
STATus:OPERation:CMU:SUM1|2:CMU<nr>
sub-registers assigned to GSMxxx-MS Signalling ...............................................................5.7
Table 6-1 Remote control commands: Non Signalling ................................................................... 6.228
Table 6-2 Remote control commands: Signalling mode ................................................................. 6.256
Table 6-3 Remote control commands: Non Signalling mode ......................................................... 6.296
Table 6-4 Remote control commands: Signalling mode ................................................................. 6.309
深圳德标仪器
135-1095-0799