Rohde & Schwarz CMU-K20, Руководство по эксплуатации

Страница: 264 / 646

Signalling: Connection Control
CMU-K20/K21/K22/K23/K24
1115.6088.12 4.186 E-12
Display Control (Connection Control – Misc.)
The
Misc.
tab is part of the second group of tabs in the
Connection Control
menu. It is accessible after
pressing the
1 / 2
toggle hotkey once. Pressing
1 / 2
again switches back to the first group of tabs
described above.
The
Misc.
tab defines in what instances the
Connection Control
popup menu is automatically opened or
closed
(Connect. Control Guidance)
.
Fig. 4-82 Connection Control – Misc.
Default Settings
The
Default All Settings
switch sets all parameters of the
Misc
tab to their default
values (see command description in chapter 6).
Remote control No command; screen configuration only.
Connect. Control
Guidance
Defines in what instances the
Connection Control
popup menu is automatically
opened or closed:
Open autom. if not connected
In the
Open automatically
mode, the
Connection Control
menu
is automatically opened each time the GSM function group is
accessed in
Signalling
test mode, each time a measurement
menu is opened while the DUT is not connected and each time a
connection is lost. Otherwise the menu must be opened
manually.
Close autom. if connected
In the
Close automatically
mode, the
Connection Control
menu
is automatically closed as soon as the CMU reaches the
Connected/Call Established
state. Otherwise the menu must be
closed manually.
Remote control No command; screen configuration only.
深圳德标仪器
135-1095-0799