Rohde & Schwarz CMU-K20, Руководство по эксплуатации

Страница: 525 / 646

CMU-K20/21/22/23/24 Options and Extensions
1115.6088.12 6.221 E-12
CONFigure:NETWork:PDATa:USDCycle <Code>
USF Duty Cycle
<Code>
Description of parameters Def. value Def. unit FW vers.
A100 |
A000 |
A012
100 % assigned
0 % assigned, 100 % random
12.5 % assigned, 87.5 % random A100 – V3.40
Description of command Sig. State
This command defines the percentage of downlink radio blocks that are transmitted with the USF
assigned to the MS. TEST
Q: all
CONFigure:NETWork:PDATa:EDAllocation <Enable>
Extend. Dyn. Alloc.
.
<Enable>
Description of parameters Def. value Def. unit FW vers.
ON | OFF |
AUTO
Enable or disable extended dynamic allocation
Enable only if the MS supports extended dynamic
allocation AUTO – V3.05
Description of command Sig. State
This command enables or disables extended dynamic allocation of the mobile. SOFF,
IDLE
Q: all
CONFigure:NETWork:PDATa:NOPDus < Number >
Number of PDUs
<Number>
Description of parameters Def. value Def. unit FW vers.
1 to 4095
Number of PDUs 4095 – V3.05
Description of command Sig. State
This command defines the number of Protocol Data Units (PDUs) that the MS is to transmit in the
uplink during GPRS test mode A. SOFF,
IDLE
Q: all
CONFigure:NETWork:PDATa:SOFFset < Offset >
Slot Offset
<Code>
Description of parameters Def. value Def. unit FW vers.
0 to 7
Slot Offset 0 – V3.05
Description of command Sig. State
This command defines the timeslot to be taken as the first downlink timeslot when the MS is in
multislot operation. SOFF,
IDLE
Q: all
CONFigure:NETWork:PDATa:TWACk <Enable>
Testmode with ACK
<Enable>
Description of parameters Def. value Def. unit FW vers.
ON | OFF
Enable or disable test mode with ACK OFF – V3.05
Description of command Sig. State
This command enables or disables the operating mode where the mobile periodically transmits a
PACKET_UPLINK_ACK_NACK message (GSM 04.60) while it is in test mode B. SOFF,
IDLE
Q: all
深圳德标仪器
135-1095-0799