Rohde & Schwarz CMU-K20, Руководство по эксплуатации

Страница: 177 / 646

CMU-K20/K21/K22/K23/K24
Signalling: Power Measurements
1115.6088.12 4.99 E-12
P/t Normal
GMSK
The
P/t Normal GMSK
hotkey selects the power versus time measurement for
GMSK modulated normal burst signals (see explanation of GSM burst structure at
the beginning of section
Limit lines (Power Configuration – Limit Lines)
on page
4.32
).
Remote control
The
P/t Normal GMSK
application is selected by the keywords
[:NORMal]
[:GMSK]
in the 3
rd
and 4
th
level of the
POWer
commands, e.g.
CONFigure:POWer
[:NORMal][:GMSK]...
P/t Normal
8PSK
The
P/t Normal 8PSK
hotkey selects the power versus time measurement for
8PSK modulated normal burst signals (see explanation of GSM burst structure at
the beginning of section
Limit lines (Power Configuration – Limit Lines)
on page
4.32
).
Remote control:
The
P/t Normal 8PSK
application is selected by the keywords
[:NORMal]:EPSK
in
the 3
rd
and 4
th
level of the POWer commands, e.g.
CONFigure:POWer
[:NORMal]:EPSK...
P/t
Multislot
The
P/t Multislot
hotkey selects the power versus time measurement for multislot
configurations (see explanation of GSM burst structure at the beginning of section
Limit lines (Power Configuration – Limit Lines)
on page
4.32
).
Remote control:
The
P/t Multislot
application is selected by the 3
rd
level keyword :
MSLot
in the
POWer commands, e.g.
CONFigure:POWer:MSLot...
P/Frame
The
P/Frame
hotkey selects the power versus frame measurement. In this
application, the average burst power in a particular timeslot is measured over a
range of consecutive TDMA frames and displayed in tabular form.
Remote control
The
P/Frame
application is selected by the keyword
:FRAMe
in the 3
rd
level of the
POWer
commands, e.g.
CONFigure:POWer:FRAMe...
P/Slot
Graph
The
P/Slot Graph
hotkey selects the power versus slot measurement with
graphical display. In this application, the average burst power in all eight timeslots
of a TDMA frame is measured and displayed in a bar graph.
Remote control
The
P/Slot Graph
application is selected by the keyword
:SLOT
in the 3
rd
level of
the
POWer
commands, e.g.
CONFigure:POWer:SLOT...
P/Slot
Table
The
P/Slot Table
hotkey selects the power versus slot measurement with tabular
display. In this application, the average burst power in all eight timeslots of several
consecutive TDMA frames is measured and displayed in a table.
Remote control
The
P/Slot Table
application is selected by the keyword
:XSLot
in the 3
rd
level of
the
POWer
commands, e.g.
CONFigure:POWer:XSLot...
P/PCL
The
P/PCL
hotkey selects the power versus PCL measurement. In this application,
the average burst power in three GSM channels is measured as a function of the
PCL of the mobile phone and displayed in tabular form.
Remote control
The
P/PCL
application is selected by the keyword
:PCL
in the 3
rd
level of the
深圳德标仪器
135-1095-0799