Rohde & Schwarz CMU-K20, Руководство по эксплуатации

Страница: 497 / 646

CMU-K20/21/22/23/24 Connection Control (Signalling only)
1115.6088.12 6.193 E-12
CONFigure:NETWork[:CSWitched]:AOCHarge:ENABle <Enable>
Advice of Charge
CONFigure:NETWork[:CSWitched]:AOCHarge <Value1>, <Value2> ... , <Value7>
<Enable>
Description of parameters Def. value Def. unit
ON | OFF
Switch on or off data for advice of charge ON –
<Value n> ...
Description of parameters Def. value Def. unit FW vers.
0 to 8191
Values 1 to 7 for calculating the charges 0,0,0,0,0,0,0 – V1.15
Description of command Sig. State
The seven numbers denote the following: Units per interval
Seconds / time interval
Scaling factor
Unit increment
Units per data interval
Segments / data interval
Initial secs / t interval
≠
CEST,
Q: all
CONFigure:NETWork[:CSWitched]:SOFFset < Offset >
Slot Offset
<Offset>
Description of parameters Def. value Def. unit FW vers.
–7 to +7
Slot Offset 0 – V3.05
Description of command Sig. State
This command defines the DL timeslot that the mobile loops back to the uplink main timeslot.
≠
CEST,
Q: all
CONFigure:NETWork:B52Mode < Mode >
B52 Mode
<Offset>
Description of parameters Def. value Def. unit FW vers.
SCOD |
MSUP
Speech codec reserved for audio tests
Speech codec supports BLER measurement SCOD – V3.10
Description of command Sig. State
This command defines the function of the speech codec. SOFF,
Q: all
Subsystem NETWork:IDENtity
The subsystem
NETWork:IDENtity
defines the identity of the mobile radio network. The subsystem
corresponds to the table section
Network Identity
in the
Network
tab of the
Connection Control
menu.
CONFigure:NETWork:IDENtity:NCC < Code >
NCC
<Code>
Description of parameters Def. value Def. unit FW vers.
0 to 7
Color code of mobile network 0 – V1.15
Description of command Sig. State
This command defines the color code of the network
(NCC = network color)
for the signals of the
measuring instrument.
SOFF,
SON
Q: all
深圳德标仪器
135-1095-0799