Rohde & Schwarz CMU-K20, Руководство по эксплуатации

Страница: 526 / 646

Options and Extensions CMU-K20/21/22/23/24
1115.6088.12 6.222 E-12
CONFigure:NETWork:PDATa:RLCMode <Mode>
RLC Mode (Testmode B)
<Mode>
Description of parameters Def. value Def. unit FW vers.
ACKN |
UNAC
Acknowledged mode (for special applications)
Unacknowledged mode UNAC – V3.10
Description of command Sig. State
This command defines the downlink RLC mode for a packet data connection in test mode B.
According to standard GSM 04.14, test mode B corresponds to
Unacknowledged
operation where the
MS loops back all data received.
SOFF,
IDLE,
ATT
Q: all
CONFigure:NETWork:PDATa:BITStream < Mode >
Bit Stream
PROCedure:NETWork:PDATa:BITStream < Mode >
<Mode>
Description of parameters Def. value Def. unit FW vers.
PR9 |
PR11 |
PR15 |
PR16
2
9
-1 PSR bit pattern
2
11
-1 PSR bit pattern
2
15
-1 PSR bit pattern
2
16
-1 PSR bit pattern
PR9 – V3.05
Description of command Sig. State
This command defines the pseudo random bit sequence that the CMU transmits to the MS in GPRS
test mode. See note on
Current vs. default values
on p. 6.212 .
all
MSSinfo
(Signalling information of mobile phone)
The subsystem
MSSinfo
contains the commands for querying the parameters of the mobile. The
subsystem corresponds to the
Signalling Info
output table in the main menu
GSMxxx-MS Overview.
The mobile parameters do not actually represent a measured value, they are provided by the mobile
phone during location update. The following parameters are related to packet data transfer.
[SENSe:]MSSinfo:MSCLass:PDATa[:GPRS]?
Multislot Class
[SENSe:]MSSinfo:MSCLass:PDATa:EGPRs?
Returned values
Description of parameters Def. value Def. unit FW vers.
1 to 29
Multislot class of mobile NAN – V3.05
Description of command Sig. State
This command is always a query and returns the multislot class of a GPRS or EGPRS mobile. ATT
TEST
深圳德标仪器
135-1095-0799