Rohde & Schwarz CMU-K20, Руководство по эксплуатации

Страница: 532 / 646

List of Commands CMU-K20/21/22/23/24
1115.6088.12 6.228 E-12
List of Commands
In the following, all remote control commands of the function group GSM900/1800/1900-MS are listed
with their parameters and page numbers. They are arranged alphabetically according to the
second
keyword of the command so that related commands belong to the same group. The commands for the
two test modes
Non Signalling and Signalling are listed separately.
Commands for GSM Module Tests
Table 6-1 Remote control commands: Non Signalling
Command, Non Signalling Parameter Remark Page
Inputs and outputs
[SENSe:]CORRection:LOSS:INPut<nr>[:MAGNitude] –50 dB to +50 dB with query 6.7
SOURce:CORRection:LOSS:INPut<nr>[:MAGNitude] –50 dB to +50 dB with query 6.7
[SENSe:]CORRection:LOSS:OUTPut<nr>[:MAGNitude] –50 dB to +50 dB with query 6.7
SOURce:CORRection:LOSS:OUTPut<nr>[:MAGNitude] –50 dB to +50 dB with query 6.7
SOURce:DM:CLOCk:FREQuency 1.219 MHz to 39.000 MHz with query 6.8
SOURce:DM:CLOCk:STATe ON | OFF with query 6.8
INPut[:STATe] RF1 | RF2 | RF4 with query 6.7
OUTPut[:STATe] RF1 | RF2 | RF3 with query 6.8
Input and output level
[SENSe:]LEVel:ATTenuation NORMal | LNOise | LDIStortion with query 6.2
[SENSe:]LEVel:DEFault ON | OFF with query 6.2
[SENSe:]LEVel:MAXimum <Level> with query 6.2
[SENSe:]LEVel:MODE MANual | AUTomatic with query 6.1
File Management
MMEMory:RECall:CURRent <FileName> [,<msus>] no query 6.10
MMEMory:SAVE:CURRent <FileName> [,<msus>] no query 6.10
Modulation measurement: 8PSK Modulation, Error Vector Magnitude
INITiate:MODulation:EVMagnitude:EPSK – no query 6.85
ABORt:MODulation:EVMagnitude:EPSK – no query 6.85
STOP:MODulation:EVMagnitude:EPSK – no query 6.85
深圳德标仪器
135-1095-0799