Rohde & Schwarz CMU-K20, Руководство по эксплуатации

Страница: 415 / 646

CMU-K20/21/22/23/24 Common: SPECtrum:SWITching
1115.6088.12 6.111 E-12
SPECtrum:SWITching
The subsystem SPECtrum:SWITching measures the off-carrier power due to the bursty nature of the
GSM signal. The subsystem corresponds to the measurement menu Spectrum, application due to
Switching, and the associated configuration popups.
Control of Measurement – Subsystem SPECtrum:SWITching
The subsystem SPECtrum:SWITching controls the spectrum due to switching measurement.
INITiate:SPECtrum:SWITching[:GMSK]
INITiate:SPECtrum:SWITching:EPSK
Start new measurement
⇒
RUN
ABORt:SPECtrum:SWITching[:GMSK]
ABORt:SPECtrum:SWITching:EPSK
Abort running measurement and switch off
⇒
OFF
STOP:SPECtrum:SWITching[:GMSK]
STOP:SPECtrum:SWITching:EPSK
Stop measurement after current stat. cycle
⇒
STOP
CONTinue:SPECtrum:SWITching[:GMSK]
CONTinue:SPECtrum:SWITching:EPSK
Next measurement step (only stepping mode )
⇒
RUN
Description of command FW vers.
These commands have no query form. They start or stop the measurement, setting it to the status
indicated in the top right column. V1.20
CONFigure:SPECtrum:SWITching[:GMSK]:EREPorting < Mode >
CONFigure:SPECtrum:SWITching:EPSK:EREPorting < Mode > Event Reporting
<Mode> Description of parameters Def. value Def. unit FW vers.
SRQ |
SOPC |
SRSQ |
OFF Service request
Single operation complete
SRQ and SOPC
No reporting
OFF – V1.20
Description of command
This command defines the events generated when the measurement is terminated or stopped (event reporting,
see chapter 5 of CMU manual).
深圳德标仪器
135-1095-0799