![background image](http://html1.mh-extra.com/html/omron/sysmac-cs1d-cpu/sysmac-cs1d-cpu_reference-manual_742268253.webp)
214
Sequence Control Instructions
Section 3-5
3-5-5
MULTI-INTERLOCK DIFFERENTIATION HOLD, MULTI-INTERLOCK
DIFFERENTIATION RELEASE, and MULTI-INTERLOCK CLEAR:
MILH(517), MILR(518), and MILC(519)
Purpose
Interlocks all outputs between MILH(517) (or MILR(518)) and MILC(519)
when the execution condition for MILH(517) (or MILR(518)) is OFF. MILH(517)
(or MILR(518)) and MILC(519) are normally used in pairs.
Unlike the IL(002)/ILC(003) interlocks, the MILH(517)/MILC(519) and
MILR(518)/MILC(519) interlocks can be nested. The operation of differenti-
ated instructions is different for interlocks created with MILH(517) and
MILR(518).
These instructions are supported only by CS/CJ-series CPU Unit Ver. 2.0 or
later.
Ladder Symbols
Operands
N: Interlock Number
The interlock number must be between 0 and 15. Match the interlock number
of the MILH(517) (or MILR(518)) instruction with the same number in the cor-
responding MILC(519) instruction.
The interlock numbers can be used in any order.
D: Interlock Status Bit
• ON when the program section is not interlocked.
• OFF when the program section is interlocked.
When the interlock is engaged, the Interlock Status Bit can be force-set to
release the interlock. Conversely, when the interlock is not engaged, the Inter-
lock Status Bit can be force-reset to engage the interlock.
Operand Specifications
MILH(517)
N
D
N
: Interlock Number
D
: Interlock Status Bit
MILR(518)
N
D
N
: Interlock Number
D
: Interlock Status Bit
MILC(519)
N
N
: Interlock Number
Area
N
D
CIO Area
---
CIO 000000 to CIO 614315
Work Area
---
W00000 to W51115
Holding Bit Area
---
H00000 to H51115
Auxiliary Bit Area
---
A00000 to A95915
Timer Area
---
---
Counter Area
---
---
DM Area
---
---
EM Area without bank
---
---
EM Area with bank
---
---
Indirect DM/EM
addresses in binary
---
---
Содержание SYSMAC CS1D-CPU**
