![background image](http://html1.mh-extra.com/html/omron/sysmac-cs1d-cpu/sysmac-cs1d-cpu_reference-manual_742268650.webp)
611
Floating-point Math Instructions
Section 3-15
Description
RAD(458) converts the 32-bit floating-point number in S+1 and S from
degrees to radians and places the result in R and R+1. (The floating point
source data must be in IEEE754 format.)
Degrees are converted to radians by means of the following formula:
Degrees
×
π
/180 = radians
If the absolute value of the result is greater than the maximum value that can
be expressed as floating-point data, the Overflow Flag will turn ON and the
result will be output as
±∞
.
If the absolute value of the result is less than the minimum value that can be
expressed as floating-point data, the Underflow Flag will turn ON and the
result will be output as 0.
Flags
Precautions
The source data in S+1 and S must be in IEEE754 floating-point data format.
3-15-10 RADIANS TO DEGREES: DEG(459)
Purpose
Converts a 32-bit floating-point number from radians to degrees and places
the result in the specified result words.
Ladder Symbol
Variations
Applicable Program Areas
R+1
R
S
S+1
Source (degrees, 32-bit floating-point data)
Result (radians, 32-bit floating-point data)
Name
Label
Operation
Error Flag
ER
ON if the source data is not recognized as floating-point
data.
ON if the source data is not a number (NaN).
OFF in all other cases.
Equals Flag
=
ON if both the exponent and mantissa of the result are 0.
OFF in all other cases.
Overflow Flag
OF
ON if the absolute value of the result is too large to be
expressed as a 32-bit floating-point value.
Underflow Flag
UF
ON if the absolute value of the result is too small to be
expressed as a 32-bit floating-point value.
Negative Flag
N
ON if the result is negative.
OFF in all other cases.
DEG(459)
S
R
S
: First source word
R
: First result word
Variations
Executed Each Cycle for ON Condition
DEG(459)
Executed Once for Upward Differentiation
@DEG(459)
Executed Once for Downward Differentiation
Not supported.
Immediate Refreshing Specification
Not supported.
Block program areas
Step program areas
Subroutines
Interrupt tasks
OK
OK
OK
OK
Содержание SYSMAC CS1D-CPU**
