![background image](http://html1.mh-extra.com/html/omron/sysmac-cs1d-cpu/sysmac-cs1d-cpu_reference-manual_742268216.webp)
177
Sequence Input Instructions
Section 3-3
3-3-9
Differentiated and Immediate Refreshing Instructions
The LOAD, AND, and OR instructions have differentiated and immediate
refreshing variations in addition to their ordinary forms, and there are also two
combinations available.
The LOAD NOT, AND NOT, OR NOT, OUT, and OUT NOT instructions have
immediate refreshing variations in addition to their ordinary forms.
The I/O timing for data handled by instructions differs for ordinary and differ-
entiated instructions, immediate refreshing instructions, and immediate
refreshing differentiated instructions.
Ordinary and differentiated instructions are executed using data input by pre-
vious I/O refresh processing, and the results are output with the next I/O pro-
cessing. Here “I/O refreshing” means the data exchanged between the CPU’s
internal memory and the I/O Unit.
In addition to the above I/O refreshing, an immediate refresh instruction
exchanges data with the I/O Unit for those words that are accessed by the
instruction. An immediate refresh instruction refreshes eight bits simulta-
neously (leftmost or rightmost eight bits) in addition to the specified bit.
Immediate refresh instructions cannot be used for Units on Slave Racks.
Instruction variation
Mnemonic
Function
I/O refresh
Ordinary
LD, AND, OR, LD NOT,
AND NOT, OR NOT
The ON/OFF status of the specified bit
is taken by the CPU with cyclic refresh-
ing, and it is reflected in the next instruc-
tion execution.
Cyclic refreshing
OUT, OUT NOT
After the instruction is executed, the ON/
OFF status of the specified bit is output
with the next cyclic refreshing.
Differentiated up
@LD, @AND, @OR
The instruction is executed once when
the specified bit turns from OFF to ON
and the ON state is held for one cycle.
Differentiated down
%LD, %AND, %OR
The instruction is executed once when
the specified bit turns from ON to OFF
and the ON state is held for one cycle.
Immediate refresh
!LD, !AND, !OR, !LD NOT,
!AND NOT, !OR NOT
The input data for the specified bit is
taken by the CPU and the instruction is
executed.
Before instruction execu-
tion
!OUT, !OUT NOT
After the instruction is executed, the
data for the specified bit is output.
After instruction execution
Differentiated up /
immediate refresh
!@LD, !@AND, !@OR
The input data for the specified bit is
refreshed by the CPU, and the instruc-
tion is executed once when the bit turns
from OFF to ON and the ON state is
held for one cycle.
Before instruction execu-
tion
Differentiated down /
immediate refresh
!%LD, !%AND, !%OR
The input data for the specified bit is
refreshed by the CPU, and the instruc-
tion is executed once when the bit turns
from ON to OFF and the ON state is
held for one cycle.
Содержание SYSMAC CS1D-CPU**
