![background image](http://html1.mh-extra.com/html/omron/sysmac-cs1d-cpu/sysmac-cs1d-cpu_reference-manual_7422681308.webp)
1269
Model Conversion Instructions (Unit Ver. 3.0 or Later)
Section 3-35
Each time that the content of S is copied to a word in the stack data area, the
stack pointer in Bs is automatically incremented by +1.
Note
Use COLLC(567) to read stack data from the stack area.
Flags
Note
In C-series PLCs, the SINGLE WORD DISTRIBUTE (DIST) instruction will
cause the Error Flag to go ON if the content of an indirectly addressed DM
word (*DM) is not BCD, or the DM area boundary is exceeded. DISTC(566)
will not cause the Error Flag to go ON in these cases.
Precautions
Once DISTC(566) has been executed with Stack Push Operation to allocate a
stack area, always specify the same length stack area in subsequent
DISTC(566) instructions. Operation will be unreliable if a different stack area
size is specified in later DISTC(566) instructions.
Be sure that the offset or stack size specified by Of does not exceed the end
of the data area when added to Bs.
Examples
Data Distribution Operation
The leftmost byte of D00300 is 0, so DISTC(566) performs the Data Distribu-
tion Operation.
When CIO 000000 is ON in the following example, the contents of D00100 will
be copied to D00210 ( 10) if the content of D00300 is 0010 BCD.
The content of D00100 can be copied to other words by changing the offset in
D00300.
Stack Push Operation
The leftmost byte of Of is 9, so DISTC(566) performs the Stack Push Opera-
tion.
When CIO 000000 is ON in the following example, DISTC(566) allocates a 10
word stack area (since the rightmost 3 digits of Of are #010) between D00200
and D00209. At the same time, the contents of D00100 will be copied to the
word calculated by adding stack p1. Finally, the stack
pointer is incremented by +1.
Name
Label
Operation
Error Flag
ER
ON if Stack Push Operation is specified, but the stack
pointer data in Bs is not BCD.
ON if Stack Push Operation is specified and the stack
pointer indicates a word that exceeds the stack data area.
Equals Flag
=
ON if the source data is 0000.
OFF in all other cases.
S: D00100
D00210
S
0 0 1 0
DISTC
Copied by DISTC(566).
10 words
4-digit BCD
Of:
Bs:
Bs
Of
Содержание SYSMAC CS1D-CPU**
