Omron CS1W-MC221 - Скачать руководство пользователя страница 114

Страница: 114 / 705

Overview of Version 1 Upgrades

Section 1-12

G execution
control

Reading timing of
indirectly specified
data

Read when prereading.

Read for all linked G32 commands when the first
G32 command is executed.

Single block opera-
tion

Blocks executed one at a
time.

All blocks with linked G32 commands executed
together.

Forced Block End Bit Only block currently being

executed is ended.

Note

Ending is placed on
hold for integrated sec-
tions.

All blocks with linked G32 commands ended.

G74

Only block currently being
executed is ended.

Note

Ending is placed on
hold for integrated sec-
tions.

All blocks with linked G32 commands ended.

G75

Only the next block is skipped. All blocks with linked G32 commands skipped.

Link (pass) condition Executing the next G32 for the

same axis and rotating direc-
tion within the minimum pass
time.

Programming a G32 command for the same axis
and rotating direction in the next block.

Note

Comments can be entered.

Maximum number of
links (passes)

No limit.

100 blocks max. (not including comment blocks)

Operating mode

All settings are valid.

Pass operation is possible for
linear interpolation or traverse
operations for the same axis
and rotating direction.

Operation is performed in Stop Mode regardless
of the operating mode (like G00).

Execution block
number (status)

The preread block number is
given.

The number of the block currently being exe-
cuted is given.

Note

If any errors are detected before the start
of operation, the number of the block with
the error is given.

Pause/continue
operation

Continuous execution is pos-
sible, but if the axis is moved
while operation is stopped,
continuous operation cannot
be continued.

Note

The request is placed
on hold for integrated
sections.

Continuous execution is possible, but if the axis
is moved while operation is stopped, continuous
operation cannot be continued.

Software limit checks
(traverse axis)

Check when prereading is
performed.

All blocks checked at beginning of linked G32
commands.

Overrides

Read when prereading and
cannot be changed during
operation.

Can be changed in real time except when decel-
erating to target position.

Classification

Functionality

Normal traverse operation

in Pass Mode (for reference)

Linked traverse (customized function)

Содержание CS1W-MC221 -


































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание CS1W-MC221 -

Отзывы:

Похожие инструкции для CS1W-MC221 -

Бренды по названию

Популярные бренды

Omron CS1W-MC221 -, Руководство по эксплуатации

Результаты поиска

Содержание CS1W-MC221 -

Отзывы:

Похожие инструкции для CS1W-MC221 -

Бренды по названию

Популярные бренды